Find methods for your needs

Refine by Feature

No filters available

Displaying 1-5 of 11 results for Tag: TraceGOLD TG-5SilMS

Items per page:
Sort by

Separation and detection of 15 triazine herbicides by GC-MS

Instrument Type: GCMS

The Thermo Scientific Trace 1310 ISQ system is applied for the direct injection and analysis of triazine herbicide samples. Separation is performed on a Thermo Scientific TraceGOLD TG-5SilMS column with MS SIM detection.

Analysis of phenols and chlorinated phenols in drinking water by GC/MS using EPA method 528

Instrument Type: GCMS

The Thermo Scientific TRACE GC Ultra is applied for the analysis of phenols and chlorinated phenols in drinking water by EPA method 528. The separation was performed on a Thermo Scientific TraceGOLD TG-5SilMS GC column, with MS detection.

Analysis of polynuclear aromatic hydrocarbons (PAHs) in wastewater by GC/MS using EPA method 610

Instrument Type: GCMS

The Thermo Scientific TRACE GC Ultra is applied for the analysis of polynuclear aromatic hydrocarbons (PAHs) in wastewater by EPA method 610. The separation was performed on a Thermo Scientific TraceGOLD TG-5SilMS GC column, with MS detection.

Analysis of polychlorinated biphenyls (PCBs) by GC/MS using EPA method 608

Instrument Type: GCMS

The Thermo Scientific TRACE GC Ultra is applied for the analysis of polychlorinated biphenyls (PCBs) by EPA method 608. The separation was performed on a Thermo Scientific TraceGOLD TG-5SilMS GC column, with MS detection.

Analysis of total organic carbon (TOC) by GC-MS

Instrument Type: GCMS

In this work the suitability and selective performance of the Thermo Scientific TraceGOLD TG-5SilMS for the analysis of total organic carbon was demonstrated. TOC can be used as a useful measure of the broad estimation or residual pesticides and other carbonaceous material. It is especially useful when coupled to mass selective detection as it allows identification and quantification of specific contaminating materials. Note the retention times in the component table match the component number and are not the actual retention time.