Find methods for your needs
Refine by Feature
Displaying 1-5 of 34 results for Tag: Sodium
AB136 (b): Determination of Inorganic Counterions in Pharmaceutical Drugs Using Capillary IC
Instrument Type: ICApproximately 50% of all drugs on the market are developed in salt forms. IC with suppressed conductivity detection plays an important role in the salt selection process to establish correct molecular mass of the entity in early stages of drug development. This study describes the determination of inorganic anions (a) and cations (b) in two different drugs using the capillary Thermo Scientific Dionex ICS-5000 system.
AB133: Cost-Effective Determination of Inorganic Anions and Cations in Municipal Drinking Water Using Capillary Ion Chromatography (Cations)
Instrument Type: ICThis study describes the determination of inorganic anions and cations in drinking water using the Thermo Scientific Dionex ICS-5000 capillary IC system. Here shows the determination of inorganic cations in drinking water using Dionex IonPac CS12A capillary column.
AB117: Determination of Cations in Fruit Juices
Instrument Type: ICDetermining cations, such as potassium, sodium, and calcium, in fruit juices is important due to the dietary significance of such cations. A simple Ion chromatography (IC) method to determine cations in fruit juices requires only a 1:100 dilution followed by injection. This method use 2 mm diameter IonPac CS12A column and provides results for multiple ions in a 5 min analysis.
TN121: Fast Determinations of Inorganic Cations in Municipal Wastewater Using High-Pressure Capillary IC
Instrument Type: ICInorganic cations were determined in municipal wastewater samples using a high pressure capillary IC system. All six cations were separated on IonPac CS16 capillary column at 30 mM MSA and 40 C. The high pressure capabilities of the ICS-5000+ capillary IC system were demonstrated by using flow rates at 3x of the typical capillary flow rate, 30 uL/min. The separation at the standard flow rate of 10 uL/min is also shown. An ICS-6000 can be used for this application.
AN86: Determination of Trace Cations in Power Plant Waters Containing Morpholine (Method 2)
Instrument Type: ICMorpholine and ammonium are used as additives in power plant waters. Morpholine acts as a corrosion inhibitor, whereas ammonium is used to control pH. In this matrix, it is critical to determine the presence of inorganic cation contaminants. This method uses the IonPac CS14 column to quantify trace concentrations of lithium, sodium, potassium, magnesium, and calcium in the presence of high levels of ammonium and morpholine. Acetonitrile can be added to the eluent to improve peak shape and optimize resolution for some of the cations of interest.