AB120: Municipal Drinking Water Analysis by Fast IC

Instrument Type: IC

This method using the IonPac AS22-Fast column provides an equivalent method to the EPA 300.0 (Part A) and 300.1 (Part A) approved methods while providing a 5 min run time that reduces cycle time, lowering the overall cost, saving time, and increasing the sample throughput. This method uses the ICS-1100 Integrated IC System but can be performed easily on any other Dionex IC system, including Reagent-Free IC (RFIC) with eluent regeneration and eluent generation IC systems.

AB121: Low-Cost Determination of Anions in Municipal Drinking Water Using EPA Method 300.0 and the Dionex ICS-900 IC System

Instrument Type: IC

This application describes the determination of inorganic anions in drinking water with the Thermo Scientific Dionex ICS-900 IC system, an integrated, single-channel IC system designed for isocratic applications with suppressed conductivity detection. The Dionex ICS-900 IC system provides a complete solution for routine analysis of inorganic anions in water and meets all requirements specified in EPA Method 300.0.

AN135 (c): Determination of Inorganic Anions in Wastewater by Ion Chromatography

Instrument Type: IC

The determination of common inorganic anions in environmental waters is one of the most important applications of ion chromatography (IC). This Application Note describes the determination of inorganic anions in wastewater and other environmental waters using conditions that are consistent with those in U.S. EPA Method 300.0. In addition to the Thermo Scientific Dionex IonPac AS4A-SC column, the Dionex IonPac AS14 and Dionex IonPac AS9-HC column are also discussed as options for this method. See AN 135 (a), (b), and (c), respectively.